Norton Metal Type 1 Right Cut right angle grinder wheels are contaminant free without iron sulfur or chlorine making them suitable for the nuclear industry. These wheels have versatile aluminum oxide for use on steels iron alloys and other ferrous (iron-containing) metals.
Reinforced cutoff wheels are designed to resist breakage caused by severe cross-bending and are required on any operation where the work is not securely clamped. Resin bonds are organic bonds that soften under the heat of grinding releasing dulled abrasive grains. Because of its forgiving nature only an organic type bond is used in cutoff wheels. The resin-bonded wheel is more resilient than a vitrified wheel. The manufacturing term for a resin bond wheel is "cured" meaning the wheel has been heated to less than 500 degrees F. Straight (also called flat) wheels are the most common grinding wheel shape. Straight wheels are used for grinding on the periphery or outside boundary edge of the wheel and produce a slightly concave surface called hollow ground on the workpiece. These wheels can be used for cutting off tool grinding (between centers or centerless) and removing mold marks and sand from castings among others. They are frequently used with grinding machines. Using a harder grade wheel increases wheel life but also increases burn and requires more power and decreases cut rate. Burn is the effect on a workpiece from thermal stress as abrasive cuts or rubs material away. The damage ranges from discoloration to cracking of the workpiece.
Aluminum oxide is a widely used and versatile abrasive material. It is a tough fracture- and wear-resistant grit that works well with a broad range of materials from metals to wood. Aluminum oxide is more durable than silicon carbide and often used for material removal and finishing.
Abrasives are used for a variety of applications from shaping a part to fine finishing depending on the grit size. Low grit numbers like 40 are coarse and are used for removing excess material and shaping a part. High grit numbers like 400 are fine and help to create a smooth surface finish.
Norton Abrasives manufactures a wide variety of sanding grinding and polishing abrasives and has been located in the United States since 1885. In 1990 Saint-Gobain purchased Norton keeping its manufacturing facilities and offices in the same location. Norton/Saint-Gobain has been recognized as a Global 100 Sustainable Company as well as earning ISO 9000 and 14001 certification for quality and environmental management standards.
- Aluminum oxide is durable and the most common abrasive grain
- Type 1 wheels are straight (also called flat) cut-off wheels and are used for peripheral grinding
- Reinforced design helps provide safety strength and straight cuts
- Resin bonds soften under the heat of grinding releasing dulled abrasive grains
- The reinforcement reduces breakage and helps provide straight cuts
